How does a septic tank work?

12

Aug

How does a septic tank work?

The septic tank is one of the most important components of any underground sewer system. It needs regular maintenance and cleaning to avoid risking the health of the environment, community, and users. You need to pump the system especially when the wastes that accumulate in the system get to the capacity. In fact, you should pump out the septic tank once the average septage hits 30 to 50% of its total volume. It is essential to do this as it prevents blockage and backflow. With proper septic tank cleaning, you will be able to maintain the optimal performance of the whole system.

Cleaning and Maintenance

To adequately maintain your septic tank, you need to inspect, vacuum, clean-out, and even treat the tank at very regular intervals. All these are important activities that you should never take for granted or neglect. This work should be left to industry experts who have the right understanding and knowledge of septic tank cleaning procedures. These experts will take the desired steps properly when cleaning your septic system.  Maintenance schedules vary from one household to another because the septic systems also vary. It is an essential strategy that will maintain your septic system in the best condition possible. Here are some of the cleaning guidelines that will help you to get the most from this exercise.

Prior Inspection

Before pumping, you should locate and remove the manhole cover, measure the septic, and inspect the system. Check all the critical mechanism, pipes, and also the drain field to make sure that the effluent leaches properly. An effluent level just above the outlet pipe is an indication of a problem while below the outlet tee shoes a leakage.

Vacuum Truck Preparation

Before you begin the pumping, you should make the vacuum truck ready through the attachment of the correct suction pipe and line. You have to confirm that you will be using accurate pressure to remove the wastes from the tank. The next thing is to layout the vacuum line in the manhole and then connect it to the vacuum equipment to prepare for the procedure of vacuuming.

Preparation of the Tank

In addition, you need to break the sludge and the scum that has settled at the bottom of the tank to enhance the proper removal of the contents. Once you set up everything, you need to suction the septage thoroughly using a septic spoon through the manhole.

Final Inspection

After you have completed the evacuation of all the materials, you should inspect the empty system for any signs of structural damages. At this point, make sure you note any damaged baffles, cracks, weep-holes, and leakages. All these steps will help you to take good care of your septic tank system. As long as the septic tank shows any sights of being close to the full capacity, you need to think of how you can empty. It is a task that is best left in the right professional hands.